if someone has this Sky coupler KX-2 in collection or even using it on the air maybe some short translation guide can be useful...
Input impedance 50-600 ohms
Optional Z-2 loop antenna for AM BC band
DESCRIPTION
The KX-2 Sky Coupler. This tuner is intended for shortwave and broadcast listening only, but it will safely handle up to about 10W of power without arcing over, so it is suitable for QRP use.
An optional Z-2 loop antenna for broadcast listening was available. There appear to be several versions of the KX-2. Some have just terminal screws for input and output and gaping holes where an SO-239 connector might be added. This is the configuration shown in the Japanese manual. At least some had SO-239 connectors factory installed similar to the later KX-3 model.
In addition, some have rack mount handles while others do not. Once again, construction is first class.
Specifications:
Frequency Range: 0.5-30 MHz
Maximum through power: 10W
Input impedance: 50-600 ohms
Dimensions: 220x66x154mm
Hope it help,
73 - Petr, OK1RP
No comments:
Post a Comment